We are a Manufacturer of Industrial Servo Voltage Stabilizer
in Delhi and Supply all over India. Voltage variation is a
common phenomenon across the world, esp. in developing and
under-developed nations. Voltage variation manifests in many
different ways Low voltage or sages: sags might be due to
undersized distribution lines, the connection of a large
load to the network, ground faults, units located towards
the end of a long supply line, etc High voltage or surges:
surges might be generated by disconnection of large loads,
increases in voltage, atmospheric events, units located
close to the start of a supply line, etc. Unbalanced
voltage: Phase-to-phase unbalancing in voltage is generally
observed where multiple consumers draw power from a common
distribution line or in remote locations far from the power
grid. The duration of the above phenomena depends on the
cause and is not easily predictable. Generally, voltage is
low during the daytime and high during the night hours.
Moreover, on holidays, peak hours, rainy days, and when the
commercial/ agricultural load is switched off, the voltage
rises quite sharply.
Benefits of Industrial Servo Voltage Stabilizer :
-
Let’s draw an analogy of the human body. Our body needs
to maintain a The constant temperature of 98.4. F to
work effectively. Even a minor increase Or decrees in
body temperate can reduce our efficiency and can lead to
further deterioration of Body parts.
-
Similarly, most electrical equipment requires a constant
voltage supply of 400V to last longer & run efficiently.
Electric Motors draw considerably high current at high /
Low voltage, causing excessive power losses and
resulting in their premature failure. Similarly, bulbs/
Tubes / Luminaries could consume up to 40% more power at
high voltage and may last for more than 10% of their
normal life.
-
The growing use of electrical and electronic equipment,
requiring a near-constant voltage supply for efficient
operation, makes line voltage regulation increasingly
necessary and to finer limits. Operation.
-
The growing use of electrical and electronic operation
makes line Automatic voltage regulation increasingly
necessary and has finer limits. Operation.
-
Voltage variations can play havoc with electronic
systems and even bring the whole plant to a grinding
halt. Even though you may currently not be experiencing
the negative effects of voltage variations, it doesn’t
imply that your unit is free from that problem your
supply may be full of variations, but none has yet been
severe enough to trigger a shutdown. Your electrical
gadgets may be exposed to significant risk, where a
small increase in the severity of the voltage variations
could cause crippling losses.
Who Needs a Stabilizer?
-
If your unit is suffering from low/high/unbalanced
voltage, you need to install a stabilizer soon.
-
Industrial units having acute/ higher failure rates of
electrical equipment such as builds, tubes, chokes,
starters, contactor coils, motors, etc., should verify
that it may be due to voltage variation (esp. high
voltage). you may note down hourly readings of incoming
voltage for a few days continuously., if you find that
the input voltage is lower or higher than 230V (single
ph) /400 (3-ph) even for a few hours a day, then you
require a stabilizer. Call our engineer for free On-site
Voltage Analysis.